Induction faucet has what maintenance skills

 Induction faucet has what maintenance skills

1. draw core damage
Faucet leaks a - must first figure out what is the cause. Encounter faucet axis pad because of the wear and tear over the years
The word, you can directly use a handy pliers will faucet gland spigot tightly clamped, counterclockwise rotation, until
to turn loose to take down, you can directly remove the worn shaft gasket, and then replaced with a new shaft gasket ready
and then tightly clamped with pliers, in accordance with the clockwise direction to tighten the gland bolt, the leaky faucet can be restored.
back to use.

2. water stop tape damage
Use a wrench to rotate the faucet counterclockwise until it turns loose to take off, then use the threaded hole with the wind seal tape toward
Repeat the winding clockwise direction for about five or six turns, pay attention to winding a - must be hard, so that the tightly fit the faucet
After completing this step, continue to use a wrench to re-tighten the faucet in a clockwise direction, and then
After opening the switch to see if there is still the problem of faucet leakage, if not, it means that the faucet is back to good.

Second, how to buy induction faucet

1.check the material of the faucet
Faucet body selection of all-copper casting, the surface should have a glossy finish. Regular product plating have specific process requirements
Requirements, and through the salt spray test, the surface must be no burr, no porosity, no oxidation spot, to prevent the purchase of zinc alloy faucet.
body.

2. check the manufacturer
Selection of induction faucet, to try to choose a qualified professional production induction faucet manufacturers, because professional do
Induction faucet manufacturers have more advantages in quality, after-sales service and price.

3.check the waterproof performance
As the induction faucet is driven by electricity, it needs excellent waterproof performance to ensure safety. To check the red
Whether the outer induction part of the epoxy resin sealant or moisture-proof treatment, the connection plug is waterproof plug. At the same time
At the same time, the solenoid valve due to long-term installation in the basin below, the machine moisture, will cause poor contact, solenoid valve minimum
Life should reach the industry implementation standards.
Induction faucet because of the convenience, with good practicality, and therefore loved by many consumers.
In daily life, we can use the above methods to repair, so as to extend the use of the faucet period. At the same time
At the same time, you can choose the best quality induction faucet based on the above methods.