How to buy a soap dispenser

Soap dispensers can be selected from the following three aspects

　　1、Material style

　　The materials used for these soap dispensers are usually stainless steel and plastic. Stainless steel is beautiful and durable, but it is not easy to see the amount of soap used. Plastic is bright, lightweight, stylish and more expensive. It is recommended to use plastic for soap dispensers at home.

　　If you are choosing to place a soap dispenser, leave the installation out of the equation and place it in a convenient place of entry. It is usually next to the tap in the sink.

　　If it is a sink soap feeder, it needs to be installed by a professional as the outlet location should be well designed except for the outlet. In the case of wall-mounted soap dispensers, although installation is required, it can be done manually and only requires attention to the installation method.

　　Choose a suitable mounting position, hang the soap dispenser on the wall for easy access and do not install it too far away from the sink. The appropriate position is 30 cm to the left or right of the sink. If you hang your towels on the sink, you can move the soap dispenser further away from the sides to avoid it looking too crowded.

　　Secondly, because it is screwed in place, it will drill holes in the wall. Once you have chosen the location, you should make sure that the holes are positioned so as not to cause excessive damage to the wall. To reinforce the fixing effect, rubber plugs should be fitted with the screws, which will protect the wall holes from slag and will no longer swell.

　　If an automatic soap dispenser is installed, check that the motor cable and induction head cable are well connected and firmly installed after installation; the power plug should be subject to the water source to prevent safety accidents.

　　2、Working principle

　　There are two types of soap dispensers: automatic soap dispensers and manual soap dispensers. The automatic soap dispenser is also known as the induction soap dispenser. It uses infrared technology. When close to the body, the liquid outlet automatically squeezes out a certain amount of soap. This type of soap dispenser is relatively expensive and is usually used in public places as it looks more advanced and graded. A manual soap dispenser is a device that puts the soap solution through a button. It is designed without electricity and manually controls the liquid output, making it more suitable for home use.

　　3、Installation methods

　　In terms of installation methods, there are three types: placement, wall-mounted and sink type. Placed soap dispenser can be placed directly on the washbasin, no installation, easy to move. Wall-mounted soap dispensers are screwed to the wall and will damage the wall when installed, saving space. Sink type soap dispensers are a combination of sink and soap dispenser with complex installation and a strong overall design.